Back to Course

PCB DESIGNING AND MANUFACTURING

0% Complete
0/0 Steps
  1. INTRODUCTION
    4 Topics
  2. CONDUCTOR AND CONDUCTIVE PATHS
    3 Topics
  3. ZERO PCB
  4. OVERVIEW OF ELECTRONICS
    4 Topics
  5. CLASSIFICATION OF PCB
    2 Topics
  6. EAGLE OVERVIEW
    2 Topics
  7. COMPOSITION OF PRINTED CIRCUIT BOARD
    3 Topics
  8. BRIEF ABOUT COPPER
  9. COLOR OF THE PRINTED CIRCUIT BOARD
  10. PCB MANUFACTURING
  11. PCB DESIGNING
    2 Topics
  12. PCB DESIGNING SOFTWARE
    3 Topics
  13. SCHEMATIC STUDY
    4 Topics
  14. PCB TERMINOLOGIES
    13 Topics
  15. ROUTING
    5 Topics
  16. GERBER GENERATION
    4 Topics
  17. GROUND PLANE
  18. BILL OF MATERIAL
    1 Topic
  19. MISCELLANEOUS ACTIVITY
    1 Quiz
  20. ROUTING RULES
    6 Topics
  21. ACTIVITY 1
    1 Quiz
  22. ACTIVITY 2
    1 Quiz
  23. ACTIVITY 3
    1 Quiz
  24. ACTIVITY 4
    1 Quiz
  25. SCHEMATIC DESIGN
    13 Topics
  26. LAYOUT DESIGN
    8 Topics
  27. ERC
    8 Topics
  28. DRC
    3 Topics
  29. ACTIVITY 6
    1 Quiz
  30. Activity 7
    1 Quiz
  31. ACTIVITY 8
    1 Quiz
  32. ACTIVITY 9
    1 Quiz
  33. ACTIVITY 5
    1 Quiz
  34. ASSIGNMENT 1
    2 Topics
  35. ASSIGNMENT 2
    1 Topic
  36. MISCLLANEOUS ASSIGNMENT
    1 Topic
Lesson 27, Topic 4
In Progress

SHOWING ERROR IN YOUR SCHEMATIC

07/08/2021
Lesson Progress
0% Complete

SHOWING ERRORS IN YOUR SCHEMATIC

 

By selecting one of the listed ERC errors you’ll notice that a black line and box will appear on your schematic, showing the exact location of the error. For example, in our image below when we select the error for an unconnected input pin you’ll notice that it zooms over to Pin 5 on our schematic, which is the pin we intentionally didn’t connect in Schematic .