Back to Course
Basics of Electronics
0% Complete
0/0 Steps
-
Lesson-1-> Introduction to basic Electronics fundamental concepts.4 Topics|1 Quiz
-
Lesson -2-> Introduction to Breadboard4 Topics|1 Quiz
-
What is Breadboard?
-
Hardware Description of Breadboard
-
Why Breadboard ?
-
How to use breadboard?
-
What is Breadboard?
-
Lesson-3 -> Introduction to LED4 Topics|1 Quiz
-
Lesson-4->Introduction to switches4 Topics|1 Quiz
-
Lesson-5-> Introduction to Transistor and voltage regulator4 Topics|1 Quiz
-
Lesson-6 -> Introduction to capacitor5 Topics|1 Quiz
-
Lesson-7->Introduction to Relay and diode4 Topics|1 Quiz
-
Activity-1->How to turn on/off multiple LED’s using a slider switch4 Topics|1 Quiz
-
Activity-2->How to use transistor as a switch and amplifier3 Topics|1 Quiz
-
Activity-3->How to make a LDR project with transistor3 Topics|1 Quiz
-
Activity-4->How to make a charging and discharging circuit of capacitor3 Topics|1 Quiz
Quizzes
Lesson 8, Topic 2
In Progress
Working
07/10/2021
Lesson Progress
0% Complete
Working of the circuit
We will control all the 3 led’s using a single slider switch.
As Slider switch have three pins:
-
Terminal 1
-
Common
-
Terminal 2
The middle pin of the slider pin is fixed and when the knob or handle is moved to left then the two pins at the left side get connected and when the handle is moved to the right side then the two pins at the right side get connected.
So, we will control the led’s using these conditions.We have connected terminal 1 of slider switch to negative and terminal 2 to the led positive pin via resistor.Now, when we will slide the switch to left side then the Led’s will be in OFF state and when the switch is towards right side then the led’d will be in ON state.
